Product Details:
Payment & Shipping Terms:
|
Product Name: | SOLAR SOLUTIONS | Grade: | AZ31,AZ63,HP |
---|---|---|---|
Application: | SAUNA , HOT TUB, WATER HEATER | Standard: | ASTM-B384 |
Shape: | ROD Shape | Process Way: | Cast . Extruded |
Type: | Sacrificial Anode Rod | Other Name: | Magnesium Rod Anode |
Highlight: | AZ31 MgAlZn Pure Magnesium Rod,100mm Pure Magnesium Rod |
AZ31 MgAlZn And Pure Magnesium Rod Anode 1~100mm Magnesium Rod For Sauna Solar Solutions , anti fouling for water tanks
The function of the magnesium rod The function of the magnesium rod is to react with the ions in the water by itself to prevent the adhesion of alkali and scale in the inner tank of the water heater and cause the inner tank to be corroded. After the electric water heater has been used for a period of time, if the water output is slow and the electricity consumption is large, it is most likely that the magnesium rod of your water heater needs to be replaced.
If the magnesium rod is not replaced, the electric water heater whose inner tank is prone to corrosion and leaking enamel tank must be replaced regularly. Because the enamel liner is made by coating and firing a layer of inorganic ceramic glaze on the special steel plate of the water heater, it does not rust and is welcomed by the majority of users. However, air bubbles or pinholes are prone to occur in the production process of enamel liner. At the same time, enamel is relatively brittle, and vibration and collision during transportation and installation are prone to scale explosion. In addition, the enamel will gradually dissolve and peel off in hot water. The above factors will cause the ordinary steel plate under the enamel coating to be exposed. The ordinary steel plate contains more impurities such as carbon and sulfur, which will easily cause the inner tank to corrode and leak.
Extruded magnesium anode rod for water heater
Product Type: | Magnesium rod |
Material: | Magnesium alloy AZ31 |
Differnet kinds: | Casting rod,Extruded rod,Rod with steel cap,Flexible anode rod |
Chemical composition: | Al:2.5-3.5%, Zn:0.6-1.4%,Mn:0.2-1.0%,Fe:0.005%max,, Cu:0.01%max,Ni:0.001%max,Si:0.1%max, Other:0.3%max,Mg:Balance |
Propertices: | Open-circuit voltage: 1.5-1.55V Close-circuit voltage:1.45-1.50V Actual capacitance: 1.105A.h/g Current efficiency:50%min |
Steel cap: | stainless steel,galvannized ,in black,coppper,etc. |
Application: | It mainly used in water heater,boiler,heat exchanger,water tank,etc. It can softing water,de-dirt residual,ensure water sanitation,water scale inhibition,protect inner tank,extend service life,etc. |
Feasures: | The extruded anode rod can be with or without steel core,can be with steel cap or only with screw;the size of cap/screw can be customilized by your specific requirements. Mainly different kinds of steel cap and screw available. |
Contact me for more details:
Vivian Jiang
International Marketing & Sales Department Manager
-----------------------------------------------
China Hunan High Broad New Material Co.Ltd.
70 Chezhan North Road,Changsha, China 410100
Tel:+86-731-85717705 Fax:+86-731-85716569
Mobile/Whatsapp: +86-139-7488-3816
Email: vivian@hbnewmaterial.com ,metal@vip.163.com
Skype: vivian.jjy