Product Details:
Payment & Shipping Terms:
|
| Material: | BC | Type: | Venturi Nozzle |
|---|---|---|---|
| NPS: | 1-1,4”,11-1,2NPSM Single Inlet Venturi Nozzle Sand Blasting Nozzle | Jacket: | Aluminum Jacket |
| Process: | Hot Press | Service: | Customized |
| Highlight: | ceramic sandblast nozzle,carbide sandblast nozzle |
||
Long venturi nozzle has the structure with the converging section, straight section and diffuser
section. Compared with the straight hole nozzle, it has better function of gas dynamics, strong
improvement in vortex, less pressure loss. Under same pressure, the exit velocity of sandblasting
meterials almost doubles as the speed of voice, resulting in higher momentum of the abrasives,
increased impact energy and added effectiveness of cleaning
Approximate Nozzle Service Life in Hours:
Nozzle material Steel Shot and Grit Expendable Abrasives Alu-oxide Abrasives
Ceramic 20 - 40 10 - 30 1-4
Tungsten Carbide 500 - 800 300 - 400 20-40
Silicon Carbide / Nitride 600 - 1000 400 - 600 50-100
Boron Carbide 1500 - 2500 750 - 1500 200 – 1000
* Estimated values for comparison. Actual service life will vary depending upon
blast pressure, media size and particle shape.
Size chart as following:
| Item | I.D(mm) | O.D(mm) | Length(mm) |
| HB-WSN-3 | 3/16"(4.8mm) | 1-1/2"(38mm) | 140mm |
| HB-WSN-4 | 1/4"(6.4mm) | 1-1/2"(38mm) | 150mm |
| HB-WSN-5 | 5/16"(7.9mm) | 1-1/2"(38mm) | 160mm |
| HB-WSN-6 | 3/8"(9.5mm) | 1-1/2"(38mm) | 175mm |
| HB-WSN-7 | 7/16"(11.1mm) | 1-1/2"(38mm) | 200mm |
| HB-WSN-8 | 1/2"(12.7mm) | 1-1/2"(38mm) | 220mm |
Remark: Any other specification may available upon requirement.
